Cisco Cisco Packet Data Interworking Function (PDIF)
CSCF SIP Proxy Configuration Mode Commands
▀ tas-service
▄ Command Line Interface Reference, StarOS Release 18
3424
tas-service
Identifies the name of the service configured on the system performing Telephony Application Server (TAS) functions.
Product
SCM (S-CSCF, SIP Proxy)
Privilege
Administrator
Mode
Exec > Global Configuration > Context Configuration > CSCF Service Configuration > SIP Proxy Configuration
configure > context context_name > cscf service service_name > rfc3261-proxy
Entering the above command sequences results in the following prompt:
[context_name]host_name(config-cscf-service-rfc3261-proxy)#
Syntax
tas-service name
[ default | no ] tas-service
default | no
Removes the TAS name from the SIP Proxy configuration.
name
Specifies the name of the service configured on the system performing TAS functions.
name
must be from 1
to 63 alpha and/or numeric characters and be an existing service.
Usage
Use this command to identify the name of the service configured on the system performing TAS functions.
The ims-sh-service commands are defined in the Context Configuration Mode Commands chapter in this
guide.
The ims-sh-service commands are defined in the Context Configuration Mode Commands chapter in this
guide.
Example
The following command identifies the TAS service name as
scscf3
:
tas-service scscf3