Cisco Cisco Packet Data Interworking Function (PDIF)
DHCPv6 Client Configuration Mode Commands
▀ server-resurrect-time
▄ Command Line Interface Reference, StarOS Release 18
3508
server-resurrect-time
Configures the amount of time that a DHCPv6 client waits before considering a dead DHCPv6 server alive again.
Product
GGSN
P-GW
SAEGW
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration > Context Configuration > DHCPv6 Service Configuration > DHCPv6 Client
Configuration
Configuration
configure > context context_name > dhcpv6-service service_name > dhcpv6-client
Entering the above command sequence results in the following prompt:
[context_name]host_name(config-dhcpv6-client)#
Syntax
server-resurrect-time revive_time
default server-resurrect-time
default
Returns the command to its default setting of 20.
revive_time
Specifies the maximum amount of time (in seconds) that a DHCPv6 client waits before considering a dead
DHCPv6 server alive again.
DHCPv6 server alive again.
revive_time
must be an integer value from 1 through 1932100.
Default: 20
Usage
Use this command to specify the amount of time that a DHCPv6 client waits before considering a dead
DHCPv6 server alive again.
DHCPv6 server alive again.
Example
The following command configures the client to wait
25
seconds before considering a dead DHCPv6 server
alive again:
server-resurrect-time 25