Cisco Cisco Packet Data Interworking Function (PDIF)
EDR Module Configuration Mode Commands
▀ cdr
▄ Command Line Interface Reference, StarOS Release 18
3660
cdr
This command allows you to configure EDR/UDR file transfer parameters.
Product
All
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration > Context Configuration > EDR Module Configuration
configure > context context_name > edr-module active-charging-service
Entering the above command sequence results in the following prompt:
[context_name]host_name(config-edr)#
Syntax
cdr { purge { storage-limit storage_limit | time-limit time_limit } [ max-files
max_records_to_purge ] | push-interval push_interval | push-trigger space-usage-percent
trigger_percentage | remove-file-after-transfer | transfer-mode { pull [ module-only ] |
push primary { encrypted-url encrypted_url | url url } [ [ max-files max_records ] [ max-
tasks task_num ] [ module-only ] [ secondary { encrypted-secondary-url
encrypted_secondary_url | secondary-url secondary_url } ] [ via local-context ] + ] |
use-harddisk }
max_records_to_purge ] | push-interval push_interval | push-trigger space-usage-percent
trigger_percentage | remove-file-after-transfer | transfer-mode { pull [ module-only ] |
push primary { encrypted-url encrypted_url | url url } [ [ max-files max_records ] [ max-
tasks task_num ] [ module-only ] [ secondary { encrypted-secondary-url
encrypted_secondary_url | secondary-url secondary_url } ] [ via local-context ] + ] |
use-harddisk }
default cdr [ purge | push-interval | push-trigger space-usage-percent | remove-file-
after-transfer | transfer-mode [ module-only | push via ] | use-harddisk ] +
after-transfer | transfer-mode [ module-only | push via ] | use-harddisk ] +
no cdr [ purge | remove-file-after-transfer | use-harddisk ] +
default
Configures the default setting for the specified keyword(s):
purge
: Disabled
push-interval
: 300 seconds
push-trigger
: 80 percent
remove-file-after-transfer
: Disabled
transfer mode
: Pull
push via
: LC is used for push
use-harddisk
: Disabled
Important:
The
use-harddisk
keyword is available only on the ASR 5000 and ASR 5500 chassis.
no
If previously configured, disables the specified configuration:
purge
: Disables purging of records.