Cisco Cisco Packet Data Interworking Function (PDIF)
Exec Mode Commands (A-C)
clear crypto ▀
Command Line Interface Reference, StarOS Release 18 ▄
3869
clear crypto
Clears crypto associations or crypto statistics.
Product
ePDG
PDSN
HA
GGSN
PDG/TTG
PDIF
SCM
Privilege
Security Administrator, Administrator, Operator
Mode
Exec
The following prompt is displayed in the Exec mode:
[local]host_name#
Syntax
clear crypto { isakmp [ tag map_name | peer peer_ip ] | security-association { counters
tag map_name [ tx | rx ] | tag map_name | peer peer_ip[ sa-index numbr ] } | statistics {
ikev2 | ipsec-3gpp-cscf | srtp } [service-ip-address ip-address | service-name name ] }
tag map_name [ tx | rx ] | tag map_name | peer peer_ip[ sa-index numbr ] } | statistics {
ikev2 | ipsec-3gpp-cscf | srtp } [service-ip-address ip-address | service-name name ] }
isakmp [ tag map_name | peer peer_ip ]
When no keywords are specified, this command clears all of the ISAKMP security associations for the
current context.
current context.
tag map_name
: Clears the ISAKMP SAs for the specified crypto map.
map_name
is the name of an existing
crypto map.
peer peer_ip
: Deletes the ISAKMP SAs for the specified peer.
peer_ip
must be entered in IPv4 dotted-
decimal or IPv6 colon-separated-hexadecimal notation.
security-association { counters map map_name [ tx | rx ] | tag map_name | peer
peer_ip
peer_ip
[ sa-index
numbr
] }
counters tag map_name [ tx | rx ]
: Resets the counters for the specified crypto map.
map_name
is
the name of an existing crypto map.
tx
specifies that only the transmit SA counters are reset.
rx
specifies
that only the receive SA counters are reset. If neither
tx
or
rx
are specified, both transmit and receive SA
counters are reset.
tag map_name
: Tears down a Security Association (SA) for the specified crypto map.
map_name
is the
name of an existing crypto map.
peer peer_ip
: Clears the SAs for all tunnels who have the peer at the specified IP address.
peer_ip
must
be entered in Pv4 dotted-decimal or IPv6 colon-separated-hexadecimal notation.
[ sa-index
numbr
: Clears a specified security association.
numbr
is an integer from 1 to 4 for releases
prior to 15.0, or 1 to 5 for release 15.0 and higher.