Cisco Cisco Packet Data Interworking Function (PDIF)
ACS Charging Action Configuration Mode Commands
deactivate-predefined-rule ▀
Command Line Interface Reference, StarOS Release 18 ▄
403
deactivate-predefined-rule
This command allows you to configure the predefined rule to ensure one time redirection after applying the charging-
action.
action.
Product
GGSN, P-GW
Privilege
Security Administrator, Administrator
Mode
Exec > ACS Configuration > Charging Action Configuration
active-charging service service_name > charging-action charging_action_name
Entering the above command sequence results in the following prompt:
[local]host_name(config-charging-action)#
Syntax
[ default | no ] deactivate-predefined-rule
default
Configures this command with its default setting.
Default: Disabled; same as
Default: Disabled; same as
no deactivate-predefined-rule
no
If previously enabled, disables the predefined rule in the current charging action.
Usage
Use this command to ensure that the predefined rule gets deactivated after applying the charging-action when
configured. By default, the configuration is disabled.
This feature is added in the ECSv2 to redirect traffic when quota for a user expires. When quota expires,
PCRF will install a rule for the redirection. In the charging-action for this redirection rule, an action to disable
the same rule will ensure one time redirection. A charging-rule-report will be sent to PCRF indicating the
PCC Rule Status as INACTIVE for the deactivated rule. Rule-Failure-Code sent is
RESOURCE_ALLOCATION_FAILURE.
The deactivation will apply only for predefined rules. If a static rule or a predefined group-of-ruledef is
associated with the charging-action, it will not be deactivated.
configured. By default, the configuration is disabled.
This feature is added in the ECSv2 to redirect traffic when quota for a user expires. When quota expires,
PCRF will install a rule for the redirection. In the charging-action for this redirection rule, an action to disable
the same rule will ensure one time redirection. A charging-rule-report will be sent to PCRF indicating the
PCC Rule Status as INACTIVE for the deactivated rule. Rule-Failure-Code sent is
RESOURCE_ALLOCATION_FAILURE.
The deactivation will apply only for predefined rules. If a static rule or a predefined group-of-ruledef is
associated with the charging-action, it will not be deactivated.