Cisco Cisco Packet Data Interworking Function (PDIF)
Exec Mode Commands (D-S)
logging active ▀
Command Line Interface Reference, StarOS Release 18 ▄
4125
logging active
Enables or disables logging for active internal log files.
Product
All
Privilege
Security Administrator, Administrator, Operator
Mode
Exec
The following prompt is displayed in the Exec mode:
[local]host_name#
Syntax
logging active [ copy runtime filters ] [ event-verbosity event_level ] [ pdu-data format
] [ pdu-verbosity pdu_level ]
] [ pdu-verbosity pdu_level ]
no logging active
no
Indicates the internal logging is to be disabled.
copy runtime filters
Copies the runtime filters and uses that copy to filter the current logging session.
event-verbosity
event_level
Specifies the level of verboseness to use in logging of events as one of:
min
: Displays minimal information about the event. Information includes event name, facility, event
ID, severity level, date, and time.
concise
: Displays detailed information about the event, but does not provide the event source within
the system.
full
: Displays detailed information about event, including source information, identifying where
within the system the event was generated.
pdu-data
format
Specifies output format for packet data units when logged as one of:
none
: raw format (unformatted).
hex
: hexadecimal format.
hex-ascii
: hexadecimal and ASCII similar to a main-frame dump.
pdu-verbosity
pdu_level
Specifies the level of verboseness to use in logging of packet data units as an integer from 1 through 5, where
5 is the most detailed.
5 is the most detailed.