Cisco Cisco Packet Data Interworking Function (PDIF)
Exec Mode Commands (D-S)
▀ sgsn imsimgr
▄ Command Line Interface Reference, StarOS Release 18
4222
sgsn imsimgr
Initiates an audit for managing the SGSN’s IMSI manager’s (IMSIMgr) IMSI table.
Important:
These commands are used primarily for troubleshooting purposes and are intended for the use of
specially trained service representatives.
Product
SGSN
Privilege
Security Administrator, Administrator
Mode
Exec
The following prompt is displayed in the Exec mode:
[local]host_name#
Syntax
sgsn imsimgr { instance instance_id }{ add-recordimsi sessmgr instance sessmgr# | audit-
with sessmgr { all | instance sessmgr# } | remove-record imsi }
with sessmgr { all | instance sessmgr# } | remove-record imsi }
instance instance_id
The number of IMSI Managers supported is scaled up to “4” on ASR 5500 and a VPC-DI platforms. This keyword is
used to specify the IMSI manager instance for which the audit is initiated. The audit is initiated from only one specified
instance of IMSI Manager at a time. This feature is only supported on ASR5500 and VPC-DI platforms.
used to specify the IMSI manager instance for which the audit is initiated. The audit is initiated from only one specified
instance of IMSI Manager at a time. This feature is only supported on ASR5500 and VPC-DI platforms.
instance_id
: The
instance_id
is an integer from “1” through “4”, it identifies the IMSI Manager instance for
which the audit is initiated.
add-record
imsi
Adds a record for an IMSI to the IMSI manager’s table and associates a specific session manager (SessMgr)
with the IMSI.
with the IMSI.
imsi
: Enter up to 15 digits. An IMSI consists of the 3-digit MCC (mobile country code) + the 2- or 3-digit
MNC (mobile network code) + the MSIN (mobile station identification number) for the remaining 10 or 9
digits (depending on the length of the MNC).
digits (depending on the length of the MNC).
audit-with
Initiates an IMSI audit with all SessMgrs or a Session Manager (SessMgr) instance specified.
remove-record imsi
Deletes a specific IMSI from the IMSI table.
imsi
: Enter up to 15 digits. An IMSI consists of the 3-digit MCC (mobile country code) + the 2- or 3-digit
MNC (mobile network code) + the MSIN (mobile station identification number) for the remaining 10 or 9
digits (depending on the length of the MNC).
digits (depending on the length of the MNC).