Cisco Cisco Packet Data Interworking Function (PDIF)
Exec Mode Commands (T-Z)
▀ test alarm
▄ Command Line Interface Reference, StarOS Release 18
4254
test alarm
Tests the alarm capabilities of the chassis.
Product
All
Privilege
Security Administrator, Administrator, Operator, Inspector
Mode
Exec
The following prompt is displayed in the Exec mode:
[local]host_name#
Syntax
test alarm { audible | central-office { critical | major | minor } }
audible | central-office { critical | major | minor }
audible
: Tests the internal alarm on the ASR 5000 System Management Card (SMC) or the ASR 5500
System Status Card (SSC) for 10 seconds. The alarm status is returned to its prior state, such as if the audible
alarm was enabled prior to the test, the alarm will again be enabled following the test.
alarm was enabled prior to the test, the alarm will again be enabled following the test.
central-office { critical | major | minor }
: Tests the specified central office alarm type.
Usage
Test the alarm capabilities of the chassis as periodic maintenance to verify the hardware for generation of the
internal audible alarms is functional.
internal audible alarms is functional.
Caution:
The use of test commands could adversely affect the operation of your system. It is recommended that
they only be used under the guidance and supervision of qualified support representative.
Example
test alarm audible
test alarm central-office critical
test alarm central-office major
test alarm central-office minor