Cisco Cisco Packet Data Interworking Function (PDIF)
ACS Charging Action Configuration Mode Commands
tos ▀
Command Line Interface Reference, StarOS Release 18 ▄
435
tos
This command allows you to configure the Type of Service (ToS) octets.
Product
All
Privilege
Security Administrator, Administrator
Mode
Exec > ACS Configuration > Charging Action Configuration
active-charging service service_name > charging-action charging_action_name
Entering the above command sequence results in the following prompt:
[local]host_name(config-charging-action)#
Syntax
tos { af11 | af12 | af13 | af21 | af22 | af23 | af31 | af32 | af33 | af41 | af42 | af43 |
be | ef | lower-bits tos_value } [ downlink | uplink ]
be | ef | lower-bits tos_value } [ downlink | uplink ]
no tos [ downlink | uplink ]
no
Disables the ToS being used in the charging action.
af xx
Specifies the use of an assured forwarding
xx
Per Hop Behavior (PHB).
be
Specifies use of Best Effort forwarding PHB.
ef
Specifies use of Expedited Forwarding PHB.
lower-bits tos_value
Important:
In StarOS 8.1 and later releases, this option is “
lower-bits tos_value
”. In StarOS 8.0 release, it
is
tos_value
.
Sets the least-significant 6 bits in the ToS byte with the specified numeric value.
tos_value
must be an integer from 0 through 63.
downlink
Specifies the ToS only for downlink packets.