Cisco Cisco Packet Data Interworking Function (PDIF)
Exec Mode show Commands (D-G)
show fng-service statistics ▀
Command Line Interface Reference, StarOS Release 18 ▄
4597
show fng-service statistics
Displays statistics for the FNG since the last restart or clear command. The output includes the number of each type of
protocol message. For example, the output includes the various types of EAP messages.
protocol message. For example, the output includes the various types of EAP messages.
Product
FNG
Privilege
Security Administrator, Administrator, Operator, Inspector
Mode
Exec
The following prompt is displayed in the Exec mode:
[local]host_name#
Syntax
show fng-service statistics [ name service_name | peer-address ipv4_address ]
name service_name
Displays statistics for an existing service name specified as an alphanumeric string of 1 through 63
characters.
characters.
peer-address ipv4_address
Displays statistics for an IP peer specified by its IP address in IPv4 dotted-decimal notation.
| { grep grep_options | more }
Pipes (sends) the output of this command to a specified command. You must specify a command to which the
output of this command will be sent.
For details on the usage of
output of this command will be sent.
For details on the usage of
grep
and
more
, refer to the section Regulating a Command’s Output in the
Command Line Interface Overview chapter.
Usage
Use this command to display FNG statistics.
Important:
You may use more than one keyword per command line.
Example
The following command displays information about the FNG service.
show fng-service statistics
Important:
Command output descriptions are available in the Statistics and Counters Reference.