Cisco Cisco Packet Data Interworking Function (PDIF)
Exec Mode show Commands (H-L)
show ip ipsp ▀
Command Line Interface Reference, StarOS Release 18 ▄
4681
show ip ipsp
Displays the names of IP pools that are enabled for the IP pool sharing protocol (IPSP) and lists the disposition of
addresses in the pools.
addresses in the pools.
Product
PDSN
HA
ASN-GW
Privilege
Security Administrator, Administrator, Operator, Inspector
Mode
Exec
The following prompt is displayed in the Exec mode:
[local]host_name#
Syntax
show ip ipsp [ summary ] [ | { grep grep_options | more } ]
summary
Displays only the disposition of the addresses in the participating IP pools. Does not show the names of the
participating IP pools.
participating IP pools.
| { grep
grep_options
|
more }
Pipes (sends) the output of this command to the specified command. You must specify a command to which
the output of this command will be sent.
For details on the usage of
the output of this command will be sent.
For details on the usage of
grep
and
more
, refer to the Regulating a Command’s Output section of the
Command Line Interface Overview chapter.
Usage
Use this command to list the names of IP pools that are participating in the IPSP and list the disposition of IP
addresses in those pools.
addresses in those pools.
Important:
For information on configuring and using IPSP refer to the System Administration Guide.
Example
To list information on all IPSP participating pools and address disposition, enter the following command:
show ip ipsp
Important:
Output descriptions for commands are available in the Statistics and Counters Reference.