Cisco Cisco Packet Data Interworking Function (PDIF)
Exec Mode show Commands (M-P)
▀ show maximum-temperatures
▄ Command Line Interface Reference, StarOS Release 18
4766
show maximum-temperatures
Shows the maximum temperature reached by each card since the last temperature timestamp reset.
Product
All
Privilege
Security Administrator, Administrator, Operator, Inspector
Mode
Exec
The following prompt is displayed in the Exec mode:
[local]host_name#
Syntax
show maximum-temperatures [ verbose] [ | { grep grep_options | more } ]
verbose
Indicates that the output is to contain detailed information.
| { grep grep_options | more }
Pipes (sends) the output of the command to the command specified. You must specify a command to which
the output will be sent.
For details on the usage of
the output will be sent.
For details on the usage of
grep
and
more
, refer to the Regulating a Command’s Output section of the
Command Line Interface Overview chapter.
Usage
Verify the maximum temperature reached by components in the chassis since the indicated timestamp.
Important:
This command is not supported on all platforms.
Example
show maximum-temperatures
show maximum-tempteratures verbose