Cisco Cisco Packet Data Interworking Function (PDIF)
Exec Mode show Commands (M-P)
▀ show pgw-service
▄ Command Line Interface Reference, StarOS Release 18
4842
show pgw-service
Displays configuration information for PDN Gateway (P-GW) services on this system.
Product
P-GW
SAEGW
Privilege
Inspector
Mode
Exec
The following prompt is displayed in the Exec mode:
[local]host_name#
Syntax
show pgw-service { all | name service_name | statistics { all | name service_name } [
verbose ] } [ | { grep grep_options | more } ]
verbose ] } [ | { grep grep_options | more } ]
all
Displays configuration information for all P-GW services configured on this system.
name service_name
Displays configuration information for an existing P-GW service specified as an alphanumeric string of 1
through 63 characters.
through 63 characters.
statistics { all | name service_name } [ verbose ]
Displays P-GW service statistics.
all
: Displays statistics for all P-GW services on the system.
name
service_name
: Displays statistics for an existing P-GW service specified as an alphanumeric string of
1 through 63 characters.
If
If
verbose
is also specified, the information is displayed in more detail.
| { grep grep_options | more }
Pipes (sends) the output of the command to the command specified. You must specify a command to which
the output will be sent.
For details on the usage of
the output will be sent.
For details on the usage of
grep
and
more
, refer to the Regulating a Command’s Output section in the
Command Line Interface Overview chapter.
Usage
Use this command to view configuration information for P-GW services on this system.
Example
The following command displays service statistics for the P-GW service named
pgw1
:
show pgw-service name pgw1