Cisco Cisco Packet Data Interworking Function (PDIF)
Firewall-and-NAT Access Ruledef Configuration Mode Commands
▀ bearer 3gpp imsi
▄ Command Line Interface Reference, StarOS Release 18
5150
bearer 3gpp imsi
This command configures an access ruledef to analyze user traffic based on International Mobile Station Identification
(IMSI) number in bearer flow.
(IMSI) number in bearer flow.
Product
PSF
NAT
Privilege
Security Administrator, Administrator
Mode
Exec > ACS Configuration > Firewall-and-NAT Access Ruledef Configuration
active-charging service service_name > access-ruledef access_ruledef_name
Entering the above command sequence results in the following prompt:
[local]host_name(config-acs-fw-ruledef)#
Syntax
[ no ] bearer 3gpp imsi { operator msid | { !range | range } imsi-pool imsi_pool }
no
Removes previously configured bearer ruledef.
operator
Specifies how to logically match the MSID.
operator
must be one of the following:
!=
: Does not equal
=
: Equals
msid
Specifies the Mobile Station Identifier.
{ !range | range } imsi-pool imsi_pool
{ !range | range }
: Specifies the range criteria:
!range
: Not in the range of
range
: In the range of
imsi-pool
imsi_pool
: Specifies the IMSI pool name.
imsi_pool
must be an alphanumeric string of 1
through 63 characters.
Usage
Use this command to specify an access ruledef to analyze user traffic based on IMSI number of mobile
station.
station.
Example