Cisco Cisco Packet Data Interworking Function (PDIF)
Global Configuration Mode Commands (L-S)
▀ snmp trap-pdu-v1tov2
▄ Command Line Interface Reference, StarOS Release 18
5556
snmp trap-pdu-v1tov2
Converts responses received from a SNMPv1 entity acting in an agent role into responses sent to a SNMPv2 entity
acting in a manager role. This command inserts an extra zero in the outgoing trap PDU as required by RFC 1908 section
3.1.2.
acting in a manager role. This command inserts an extra zero in the outgoing trap PDU as required by RFC 1908 section
3.1.2.
Product
All
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration
configure
Entering the above command sequence results in the following prompt:
[local]host_name(config)#
Syntax
[ no ] snmp trap-pdu-v1tov2
no
Disables the adding of the extra zero in the outgoing trap PDU.
Usage
Use this command to enable SNMPv2 support as defined in RFC 1908, section 3.1.2. By default, StarOS does
not add the extra zero because Cisco Prime Network does not support the extra zero.
not add the extra zero because Cisco Prime Network does not support the extra zero.
Example
The following command adds the extra zero to support of SNMPv2:
snmp trap-pdu-v1tov2