Cisco Cisco Packet Data Interworking Function (PDIF)
Global Configuration Mode Commands (T-threshold phspc)
▀ threshold fng-current-active-sessions
▄ Command Line Interface Reference, StarOS Release 18
5680
threshold fng-current-active-sessions
Configures alarm or alert thresholds for the number of subscribers currently active Femto Network Gateway (FNG)
sessions.
sessions.
Product
All
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration
configure
Entering the above command sequence results in the following prompt:
[local]host_name(config)#
Syntax
threshold fng-current-active-sessions
default threshold fng-current-actice-sessions
default
Disables the threshold for configured alarm and sets the
high_thresh
and
low_thresh
values to 0.
high_thresh
Default: 0
Specifies the high threshold number of the total number of active FNG subscriber sessions that must be met
or exceeded within the polling interval to generate an alert or alarm.
Specifies the high threshold number of the total number of active FNG subscriber sessions that must be met
or exceeded within the polling interval to generate an alert or alarm.
high_thresh
is an integer from 0 through 1000000.
clear
low_thresh
Default: 0
Specifies the low threshold number of the total number of active FNG subscriber sessions that maintains a
previously generated alarm condition. If the number of errors falls beneath the low threshold within the
polling interval, a clear alarm will be generated.
Specifies the low threshold number of the total number of active FNG subscriber sessions that maintains a
previously generated alarm condition. If the number of errors falls beneath the low threshold within the
polling interval, a clear alarm will be generated.
low_thresh
is an integer from 0 through 1000000.
Important:
This value is ignored for the Alert model. In addition, if this value is not configured for the Alarm
model, the system assumes it is identical to the high threshold.
Usage
Sets the upper and power thresholds for the total number of active FNG subscriber sessions that will generate
and clear alerts or alarms.
Alerts or alarms are triggered based on the following rules:
and clear alerts or alarms.
Alerts or alarms are triggered based on the following rules: