Cisco Cisco Packet Data Interworking Function (PDIF)
Global Configuration Mode Commands (T-threshold phspc)
threshold pdg-current-sessions ▀
Command Line Interface Reference, StarOS Release 18 ▄
5719
threshold pdg-current-sessions
Configures alarm or alert thresholds for monitoring the total number of current Packet Data Gateway/Tunnel
Termination Gateway (PDG/TTG) sessions, including inactive sessions.
Termination Gateway (PDG/TTG) sessions, including inactive sessions.
Product
PDG/TTG
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration
configure
Entering the above command sequence results in the following prompt:
[local]host_name(config)#
Syntax
threshold pdg-current-sessions high_thresh [ clear low_thresh ]
high_thresh
Configures the total number of PDG sessions on a chassis, both active and inactive.
high_thresh
is any
integer from 0 through 1000000.
There is no default, but 0 means that there is no threshold monitoring.
There is no default, but 0 means that there is no threshold monitoring.
clear low_thresh
Clears any number of sessions being monitored using the
high_thresh
variable defined above.
low_thresh
is any integer from 0 through 1000000.
Usage
Thresholds are provided for monitoring the overall PDG usage on a chassis. This command is used to monitor
the total number of PDG sessions, both active and inactive, for an entire chassis.
the total number of PDG sessions, both active and inactive, for an entire chassis.
Example
The following command configures a monitoring threshold of
300000
and a clearing threshold of
100000
active and inactive PDG sessions on a chassis:
threshold pdg-current-sessions 300000 clear 100000