Cisco Cisco Packet Data Interworking Function (PDIF)
Global Configuration Mode Commands (threshold poll commands A - N)
threshold poll dereg-reply-error interval ▀
Command Line Interface Reference, StarOS Release 18 ▄
5829
threshold poll dereg-reply-error interval
Configures the polling interval to count the number of de-registration reply errors per HA service.
Product
HA
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration
configure
Entering the above command sequence results in the following prompt:
[local]host_name(config)#
Syntax
threshold poll dereg-reply-error interval duration
default threshold poll dereg-reply-error interval
default
Uses the default polling interval.
Default: 300 seconds
Default: 300 seconds
interval duration
Specifies the amount of time (in seconds) that comprises the polling interval.
duration
must be an integer from 60 through 60000. The input will be rounded up to the closest multiple of
30.
Usage
This command sets the time period over which to monitor the specified value for threshold crossing.
Important:
All configured polling intervals are rounded up to the closest multiple of 30. For example, if a
polling interval is configured for 130 seconds, the system uses a polling interval of 150 seconds.
Refer to the
threshold monitoring
and other threshold commands in this chapter for additional
information on the system’s support for thresholding.
Important:
To enable an SNMP trap for monitoring this threshold use the
snmp trap enable
ThreshHASvcDeregReplyError
command in this mode.
Example
The following command configures the HA de-registration reply error threshold polling interval to
600
seconds: