Cisco Cisco Packet Data Interworking Function (PDIF)
Global Configuration Mode Commands (threshold ppp - url-blacklisting)
threshold subscriber total ▀
Command Line Interface Reference, StarOS Release 18 ▄
5963
threshold subscriber total
Configures alarm or alert thresholds for the total number of active and inactive subscribers in the system.
Product
PDSN
GGSN
HA
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration
configure
Entering the above command sequence results in the following prompt:
[local]host_name(config)#
Syntax
threshold subscriber total high_thresh [ clear low_thresh ]
high_thresh
Default: 0
Specifies the high threshold number of subscriber sessions (active and dormant) facilitated by the system that
must be met or exceeded within the polling interval to generate an alert or alarm.
Specifies the high threshold number of subscriber sessions (active and dormant) facilitated by the system that
must be met or exceeded within the polling interval to generate an alert or alarm.
high_thresh
is an integer from 0 through 4000000. A value of 0 disables the threshold.
clear
low_thresh
Default: 0
Specifies the low threshold number of subscriber sessions (active and dormant) facilitated by the system that
maintains a previously generated alarm condition. If the number of sessions falls beneath the low threshold
within the polling interval, a clear alarm will be generated.
Specifies the low threshold number of subscriber sessions (active and dormant) facilitated by the system that
maintains a previously generated alarm condition. If the number of sessions falls beneath the low threshold
within the polling interval, a clear alarm will be generated.
low_thresh
is an integer from 0 and 4000000. A value of 0 disables the threshold.
Important:
This value is ignored for the Alert model. In addition, if this value is not configured for the Alarm
model, the system assumes it is identical to the high threshold.
Usage
Total subscriber thresholds generate alerts or alarms based on the total number of subscriber sessions (active
and dormant) facilitated by the system during the specified polling interval.
Alerts or alarms are triggered for subscriber totals based on the following rules:
and dormant) facilitated by the system during the specified polling interval.
Alerts or alarms are triggered for subscriber totals based on the following rules:
Enter condition: Actual total number of subscriber sessions is greater than or equal to the high
threshold.
Clear condition: Actual total number of subscriber sessions is less than the low threshold.