Cisco Cisco Packet Data Interworking Function (PDIF)
GPRS Service Configuration Mode Commands
peer-nsei ▀
Command Line Interface Reference, StarOS Release 18 ▄
6055
peer-nsei
This command associates a peer (remote) network service entity (NSEI) for a BSS with this GPRS service.
Product
SGSN
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration > Context Configuration > GPRS Service Configuration
configure > context context_name > gprs-service service_name
Entering the above command sequence results in the following prompt:
[context_name]host_name(config-gprs-service)#
Syntax
peer-nsei nse_id { associate dscp-template downlink template_name | lac lac_id rac rac_id
| name peer_nsei_name | pooled }
| name peer_nsei_name | pooled }
no peer-nsei nse_id [ associate dscp-template downlink | lac lac_id rac rac_id | name |
pooled ]
pooled ]
no
Removes the specified configuration from this peer-nsei configuration.
Important:
Deleting the LAC/RAC portion of the configuration will probably result in the loss of subscriber
connections.
nse_id
Defines a specific peer NSEI configuration for this GPRS service.
nse_id
- enter an integer from 0 to 65535.
associate dscp-template downlink template_name
Identifies a specific DSCP marking template to associate with the peer-NSE. The DSCP template must first
be created with SGSN Global configuration mode and then defined with the commands in the DSCP
Template configuration mode. The template provides a mechanism for differentiated services code point
(DSCP) marking of control packets and LLC signaling messages on Gb interfaces. This DSCP marking
feature enables the SGSN to perform classifying and managing of network traffic and to determine quality of
service (QoS) for the interfaces to an IP network
be created with SGSN Global configuration mode and then defined with the commands in the DSCP
Template configuration mode. The template provides a mechanism for differentiated services code point
(DSCP) marking of control packets and LLC signaling messages on Gb interfaces. This DSCP marking
feature enables the SGSN to perform classifying and managing of network traffic and to determine quality of
service (QoS) for the interfaces to an IP network
template_name
- enter an alphanumeric string of 1 to 64 characters.
lac
lac_id
Defines a location area code associated with the NSE BSS.
lac_id
must be an integer between 1 and 65535.