Cisco Cisco Packet Data Interworking Function (PDIF)
Gs Service Configuration Mode Commands
▀ associate-sccp-network
▄ Command Line Interface Reference, StarOS Release 18
6082
associate-sccp-network
This command associates a previously defined Signaling Connection Control Part (SCCP) network instance with the Gs
service. This association is required to access Visitor Location Register(s) (VLRs).
service. This association is required to access Visitor Location Register(s) (VLRs).
Product
SGSN
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration > Context Configuration > Gs Service Configuration
configure > context context_name > gs-service service_name
Entering the above command sequence results in the following prompt:
[context_name]host_name(config-gs-service)#
Syntax
associate-sccp-network sccp_net_id
no associate-sccp-network
no
Removes the associated SCCP network configuration instance from this Gs service configuration.
sccp_net_id
Identifies the SCCP network configuration instance to associate with this Gs interface to enable connection
with VLR(s).
with VLR(s).
sccp_network_num:
Must be an integer from 1 through 12.
Usage
Use this command to associate the SCCP network configuration instance with the Gs interface in this service.
Important:
A single SCCP network configuration instance can not be shared with multiple Gs services.
Important:
To enable a Gs service, the user needs to configure ssn with the
bssap+
command.
Example
Following command associates SCCP network 2 with this Gs service.
associate-sccp-network 2