Cisco Cisco Packet Data Interworking Function (PDIF)

 

▄  Command Line Interface Reference, StarOS Release 18 

Configures throttling behavior based on peer's overload reduction-metric by excluding some or all emergency events 
and/or EARP messages for the GTP-C Overload Control Profile feature. 

  GTP-C Overload Control Profile is a license-controlled feature. For more information, contact your 

Cisco account or support representative. 

 

P-GW 

SAEGW 

S-GW 

 

Administrator, Security Administrator 

 

Exec > Global Configuration > GTPC Overload Control Profile Configuration 

configure > gtpc-overload-control-profile  profile_name

 

Entering the above command sequence results in the following prompt: 

[local]host_name(config-gtpc-overload-control-profile)# 

 

throttling-behavior { earp [ 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9| 10 | 11 | 12 | 13 | 14 | 
15 * ] exclude } | emergency-events exclude }  

no throttling-behavior { earp [ 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9| 10 | 11 | 12 | 13 | 14 
| 15 * ] exclude } | emergency-events exclude }  

 

Configures throttling behavior based on peer's overload reduction-metric. 

 

Excludes the specified messages with configured earp from throttling due to peer's overload-reduction metric. 
If a bearer with configured EARP is created or updated, it will be excluded from throttling. 

: More than one of the previous keywords can be entered within a single command. 

 

P-GW Only. Excludes all emergency events from throttling due to the peer's overload reduction-metric. 
While reducing messages towards the peer based on the overload information received from the peer, the P-
GW will exclude events sent for emergency sessions.