Cisco Cisco Packet Data Interworking Function (PDIF)
GTPC Overload Control Profile Configuration Mode Commands
weightage ▀
Command Line Interface Reference, StarOS Release 18 ▄
6143
weightage
Configures weightage for various GTP-C Overload Control Profile parameters.
Important:
GTP-C Overload Control Profile is a license-controlled feature. For more information, contact your
Cisco account or support representative.
Product
P-GW
SAEGW
S-GW
Privilege
Administrator, Security Administrator
Mode
Exec > Global Configuration > GTPC Overload Control Profile Configuration
configure > gtpc-overload-control-profile profile_name
Entering the above command sequence results in the following prompt:
[local]host_name(config-gtpc-overload-control-profile)#
Syntax
weightage system-cpu-utilization percentage system-memory-utilization percentage license-
session-utilization percentage
session-utilization percentage
default weightage
weightage
Specifies that system memory, CPU, and license session utilization parameters are to be configured.
Important:
All parameters must be specified. The total weightage for all parameters should be 100%. The total
of all three parameters cannot exceed 100%.
system-cpu-utilization percentage
Specify the desired system CPU utilization weightage as a percentage of 100.
percentage
must be an integer from 0 to 100.
Default: 40%
system-memory-utilization percentage
Specify the system memory utilization weightage as a percentage of 100.
percentage
must be an integer from 0 to 100.
Default: 30%