Cisco Cisco Packet Data Interworking Function (PDIF)
GTPP Server Group Configuration Mode Commands
gtpp mbms tariff ▀
Command Line Interface Reference, StarOS Release 18 ▄
6185
gtpp mbms tariff
Configures the tariff slots for tariff-based triggers for GTPP MBMS Charging Data Record (G-MBMS-CDR)
generation.
generation.
Product
GGSN
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration > Context Configuration > GTPP Server Group Configuration
configure > context context_name > gtpp group group_name
Entering the above command sequence results in the following prompt:
[context_name]host_name(config-gtpp-group)#
Syntax
gtpp mbms tariff time1 mins hours [ time2 mins hours [ time3mins hours [ time4mins hours
] ] ]
] ] ]
no gtpp mbms tariff
no
Disables the tariff-based triggers for GTPP MBMS Charging Data Record (G-MBMS-CDR) generation.
tariff time1 mins hours
[ time2mins hours
[ time3mins hours
[ time4mins hours ]
] ]
Specifies time-of-day time values to close the current statistics container (but not necessarily the accounting
record). Default: Disabled
record). Default: Disabled
Important:
The system assumes that the billing system uses the day/date to determine if the statistics container
represents an actual tariff period.
For each of the different tariff times, the following parameters must be configured:
mins
: Minute of the hour, an integer from 0 through 59.
hours
: Hour of the day, an integer from 0 through 23.
Usage
Use this command to configure the tariff-time-based triggers for G-MBMS-CDR generation in MBMS user
data service.
data service.
Example
The following command configures the tariff-time-based trigger to generate G-MBMS-CDRs every day at 11
hours and 30 min:
hours and 30 min:
gtpp mbms tariff time1 30 11