Cisco Cisco Packet Data Interworking Function (PDIF)
GTPP Server Group Configuration Mode Commands
▀ gtpp trigger
▄ Command Line Interface Reference, StarOS Release 18
6206
gtpp trigger
Disables GTPP trigger conditions that cause either partial CDR record closure or opening of a new CDR record
container. GTPP Triggers are specified in 3GPP TS 32.251 v6.6.0. All GTPP trigger changes take effect immediately,
except volume-limit.
container. GTPP Triggers are specified in 3GPP TS 32.251 v6.6.0. All GTPP trigger changes take effect immediately,
except volume-limit.
Product
ECS
GGSN
P-GW
SAEGW
SGSN
S-GW
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration > Context Configuration > GTPP Server Group Configuration
configure > context context_name > gtpp group group_name
Entering the above command sequence results in the following prompt:
[context_name]host_name(config-gtpp-group)#
Syntax
gtpp trigger { apn-ambr-change [ default-bearer-only | all-non-gbr-bearers | all-bearers
] | cell-update | dcca | direct-tunnel | egcdr max-losdv | ggsn-preservation-mode-change
| inter-plmn-sgsn-change | ms-timezone-change | plmn-id-change | qos-change | rat-change
[ generate { cdr | container } ] | routing-area-update | service-idle-out | serving-node-
change-limit | sgsn-change-limit | tariff-time-change | time-limit | uli-change | volume-
limit }
] | cell-update | dcca | direct-tunnel | egcdr max-losdv | ggsn-preservation-mode-change
| inter-plmn-sgsn-change | ms-timezone-change | plmn-id-change | qos-change | rat-change
[ generate { cdr | container } ] | routing-area-update | service-idle-out | serving-node-
change-limit | sgsn-change-limit | tariff-time-change | time-limit | uli-change | volume-
limit }
default gtpp trigger
no gtpp trigger { apn-ambr-change [ default-bearer-only | all-non-gbr-bearers | all-
bearers ] | cell-update | dcca | direct-tunnel | egcdr max-losdv | ggsn-preservation-
mode-change | inter-plmn-sgsn-change | ms-timezone-change | plmn-id-change | qos-change |
rat-change | routing-area-update | service-idle-out | serving-node-change-limit | sgsn-
change-limit | tariff-time-change | time-limit | uli-change | volume-limit }
bearers ] | cell-update | dcca | direct-tunnel | egcdr max-losdv | ggsn-preservation-
mode-change | inter-plmn-sgsn-change | ms-timezone-change | plmn-id-change | qos-change |
rat-change | routing-area-update | service-idle-out | serving-node-change-limit | sgsn-
change-limit | tariff-time-change | time-limit | uli-change | volume-limit }
default
Sets the specified trigger condition back to the default setting. All trigger conditions are enabled by default.
no
Disables the specified trigger condition.