Cisco Cisco Packet Data Interworking Function (PDIF)
HeNB-GW Network Service Configuration Mode Commands
logical-enb ▀
Command Line Interface Reference, StarOS Release 18 ▄
6335
logical-enb
This command enables the configuration of one or more logical eNodeBs within the HeNB-GW.
Product
HeNB-GW
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration > Context Configuration > HeNBGW-Network Service Configuration
configure > context
context_name
> henbgw-network-service
service_name
Entering the above command sequence results in the following prompt:
[context_name]host_name(config-henbgw-network-service)#
Syntax
logical-enb global-enb-id plmn id mcc mcc_val mnc mnc_val { home-enb-id henb_id | macro-
enb-id menb_id [ -noconfirm ] }
enb-id menb_id [ -noconfirm ] }
no logical-enb global-enb-id plmn id mcc mcc_val mnc mnc_val { home-enb-id henb_id |
macro-enb-id menb_id }
macro-enb-id menb_id }
no
Removes the configured logical eNodeB from this HeNB-GW Network service configuration.
mcc mcc_val
Identifies the mobile country code for the IMSI which must be entered between 100 and 999, as a string of
size 3.
size 3.
mnc mnc_val
Identifies the Mobile Network Code which is a value between 00 and 999, as a string of size 2 to 3.
home-enb-id henb_id
Identifies the Home eNodeB ID which is an integer from 1 to 268435455.
macro-enb-id menb_id
Identifies the Macro eNodeB ID which is again an integer value between 1 and 1048575.
-noconfirm
Creates a new HeNB-GW network service without prompting for confirmation.