Cisco Cisco Packet Data Interworking Function (PDIF)
HSGW Service Configuration Mode Commands
▀ context-retention-timer
▄ Command Line Interface Reference, StarOS Release 18
6348
context-retention-timer
Configures the maximum number of consecutive seconds that a UE session context (which includes the LCP,
authentication and A10 session context for a given UE) is maintained by the HSGW before it is torn down.
authentication and A10 session context for a given UE) is maintained by the HSGW before it is torn down.
Product
HSGW
Privilege
Administrator
Mode
Exec > Global Configuration > Context Configuration > HSGW Service Configuration
configure > context context_name > hsgw-service service_name
Entering the above command sequence results in the following prompt:
[context_name]host_name(config-hsgw-service)#
Syntax
context-retention-timer timeout [ sec ]
[ default | no ] context-retention-timer timeout
default
Disables the timer.
no
Disables the timer.
timeout [ sec ]
Specifies the amount of time (in seconds) that the session context is maintained before it is disassembled as
an integer from 1 through 3600. Default: 60.
In Release 15.0 and later, the maximum value has been increased to 86400 seconds (24 hours).
an integer from 1 through 3600. Default: 60.
In Release 15.0 and later, the maximum value has been increased to 86400 seconds (24 hours).
Usage
Use this command to configure a timer to retain session contexts for a specified amount of time before
disassembling it.
disassembling it.
Example
The following command allows the HSGW to maintain session contexts for
120
seconds before tearing them
down:
context-retention-timer timeout 120