Cisco Cisco Packet Data Interworking Function (PDIF)
HSGW Service Configuration Mode Commands
▀ lifetime
▄ Command Line Interface Reference, StarOS Release 18
6364
lifetime
Specifies how long an A10 connection can exist before its registration is considered expired.
Product
HSGW
Privilege
Administrator
Mode
Exec > Global Configuration > Context Configuration > HSGW Service Configuration
configure > context context_name > hsgw-service service_name
Entering the above command sequence results in the following prompt:
[context_name]host_name(config-hsgw-service)#
Syntax
lifetime time
[ default | no ] lifetime
default
Resets the lifetime value to the default setting of 1800 seconds.
no
Specifies that an A10 connection can exist for an infinite amount of time.
time
Specifies the time (in seconds) that an A10 connection can exist before its registration is considered expired
as an integer from 1 through 65534. Default: 1800
as an integer from 1 through 65534. Default: 1800
Usage
Use this command to set a limit to the amount of time that a subscriber session can remain up whether or not
the session is active or dormant. If the lifetime timer expires before the subscriber terminates the session, the
connection is terminated automatically.
the session is active or dormant. If the lifetime timer expires before the subscriber terminates the session, the
connection is terminated automatically.
Example
The following command specifies a time of
3600
seconds (1 hour) for subscriber sessions on this HSGW
service:
lifetime 3600