Cisco Cisco Packet Data Interworking Function (PDIF)
HNB-GW Service Configuration Mode Commands
associate gtpu-service ▀
Command Line Interface Reference, StarOS Release 18 ▄
6443
associate gtpu-service
Associates a previously configured GTP-U service to bind the HNB-GW service with an HNB towards the HNB side. A
GTP-U service must be configured in Context Configuration mode before using this configuration.
GTP-U service must be configured in Context Configuration mode before using this configuration.
Product
HNB-GW
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration > Context Configuration > HNB-GW Service Configuration
configure > context context_name > hnbgw-service service_name
Entering the above command sequence results in the following prompt:
[local]host_name(config-hnbgw-service)#
Syntax
associate gtpu-service svc_name
no associate gtpu-service
no
Removes the associated GTP-U service from this HNB-GW service configuration.
svc_name
Identifies the name of the pre-configured GTP-U service to associate with an HNB-GW service towards the
Home-NodeB side.
Home-NodeB side.
svc_name
is an alphanumeric string of 1 through 63 characters.
Usage
Use this command to configure GTP-U data plan between HNB-GW service and Home-NodeB. The service
defined for GTP-U can be configured in Context configuration mode.
defined for GTP-U can be configured in Context configuration mode.
Important:
Another GTP-U service can be used to bind the HNB-GW service towards the Core Network and can
be configured in HNB-PS Configuration mode. For more information on GTP-U service configuration, refer GTP-U
Service Configuration Mode Commands.
Service Configuration Mode Commands.
Example
Following command associates GTP-U service named
gtpu_hnb1
with specific HNB-GW service towards
Home-NodeB side.
associate gtpu-service gtpu_hnb1