Cisco Cisco Packet Data Interworking Function (PDIF)
HNB-GW Service Configuration Mode Commands
▀ ip iu-qos-dscp
▄ Command Line Interface Reference, StarOS Release 18
6462
ip iu-qos-dscp
Enables or disables the DSCP marking parameter for data packets carried over over an IuCS/IuPS interface towards
MSC/SGSN. By default this command is Disabled.
MSC/SGSN. By default this command is Disabled.
Product
HNB-GW
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration > Context Configuration > HNB-GW Service Configuration
configure > context context_name > hnbgw-service service_name
Entering the above command sequence results in the following prompt:
[local]host_name(config-hnbgw-service)#
Syntax
ip iu-qos-dscp protocol udp payload { gtpu | rtcp | rtp } dscp_code
{ default | no } ip iu-qos-dscp protocol udp payload { gtpu | rtcp | rtp }
no
Use this keyword to place the configuration in pass-through mode (no marking of DSCP). Use of this
keyword is allowed even when there is no previous DSCP parameter set.
keyword is allowed even when there is no previous DSCP parameter set.
Important:
In this configuration the
no
keyword does not disable or remove a previous
configuration.
default
Enables the DSCP marking on HNB-GW and set/restores the QoS parameters to their default setting.
udp payload { gtpu | rtcp| rtp}
dscp_code
Specifies the QoS traffic pattern towards MSC/SGSN in SCTP protocol association over IuCS/IuPS interface.
By this keyword the Traffic classes specified by a user based on UDP protocol and GTPU, RTCP, and RTP
type of payload identified based on the transport level port numbers.
Default DSCP code in UDP traffic are:
By this keyword the Traffic classes specified by a user based on UDP protocol and GTPU, RTCP, and RTP
type of payload identified based on the transport level port numbers.
Default DSCP code in UDP traffic are:
GTP-U: cs1
RTCP: ef
RTP: af41
dscp_code
Specifies the QoS DSCP codes supported for SCTP and UDP traffic and its payloads towards MSC/SGSN
over IuCS/IuPS interface.
following type of DSCP codes
over IuCS/IuPS interface.
following type of DSCP codes
dscp_code
are supported over IuH interface: