Cisco Cisco Packet Data Interworking Function (PDIF)
HSS Peer Service Configuration Mode Commands
diameter hss-dictionary ▀
Command Line Interface Reference, StarOS Release 18 ▄
6535
diameter hss-dictionary
Specifies the Diameter Credit Control dictionary for the HSS peer service.
Product
MME
SGSN
Privilege
Administrator
Mode
Exec > Global Configuration > Context Configuration > HSS Peer Service Configuration
configure > context context_name > hss-peer-service service_name
Entering the above command sequence results in the following prompt:
[context_name]host_name(config-hss-peer-service)#
Syntax
diameter hss-dictionary { custom1 | standard | standard-r9 } [ eir-dictionary { custom1 |
standard | standard-r9 } ]
standard | standard-r9 } ]
default diameter hss-dictionary
default
Sets the dictionary to default standard-r9 for HSS service.
custom1
Sets the Diameter dictionary to a customer-specific HSS Diameter dictionary. Default: Disabled
standard
Sets the Diameter dictionary to the standard (3GPP release 8) HSS peer dictionary. Default: Disabled
standard-r9
Sets the Diameter dictionary to the standard HSS peer dictionary for 3GPP release 9. Default: Enabled
eir-dictionary { custom1 | standard | standard-r9}
Specifies that an Equipment Identity Register (EIR) dictionary is to be used in conjunction with the HSS
Diameter dictionary.
Diameter dictionary.
custom1
: Sets the EIR Diameter dictionary to a customer-specific EIR Diameter dictionary.
standard
: Sets the EIR Diameter dictionary to the standard HSS peer dictionary.
standard-r9
: Sets the EIR Diameter dictionary to the standard HSS peer dictionary for release 9.
Usage
Use this command to select the Diameter dictionary for the HSS peer service.
Example
The following command sets the Diameter dictionary to IETF RFC 4006 specific: