Cisco Cisco Packet Data Interworking Function (PDIF)
IMEI Profile Configuration Mode
ignore-pdp-data-inactivity ▀
Command Line Interface Reference, StarOS Release 18 ▄
6583
ignore-pdp-data-inactivity
On executing this command the SGSN ignores PDP Data Inactivity configuration under the APN profile for one or
more matching IMEIs.
more matching IMEIs.
Product
SGSN
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration > IMEI Profile Configuration
configure > imei-profile profile_name
Entering the above command sequence results in the following prompt:
[local]host_name(config-imei-profile-profile_name)#
Syntax
ignore-pdp-data-inactivity
remove ignore-pdp-data-inactivity
remove
This command is used to disable or remove the option to ignore PDP data inactivity from the IMEI profile.
Usage
The SGSN supports options to configure PDP Data Inactivity detection duration and actions to be performed
on timeout under the APN-Profile. The following configurable actions are supported under APN-Profile in
case of PDP Data Inactivity detection in the PDP context:
on timeout under the APN-Profile. The following configurable actions are supported under APN-Profile in
case of PDP Data Inactivity detection in the PDP context:
1. De-activate all PDPs of the subscriber
2. De-activate all PDPs of the bundle (all linked PDPs)
3. Detach the subscriber. This action is triggered when:
2. De-activate all PDPs of the bundle (all linked PDPs)
3. Detach the subscriber. This action is triggered when:
Data in-activity is detected for all PDPs
Data in-activity is detected for any of the PDPs
On the Detection of the PDP Data Inactivity, depending on the configuration option the SGSN either de-
activates the PDP or detaches the subscriber.
The
activates the PDP or detaches the subscriber.
The
ignore-pdp-data-inactivity
CLI is added to provide an option under the IMEI-Profile to ignore
PDP Data Inactivity configuration for one or more IMEIs. On configuring this CLI, the SGSN ignores the
application of in-activity configuration (configured in the APN-Profile) for a specified set of IMEI's.
application of in-activity configuration (configured in the APN-Profile) for a specified set of IMEI's.
Example
Use this command to ignore PDP Data Inactivity configuration under the APN profile for one or more
matching IMEIs.
matching IMEIs.
ignore-pdp-data-inactivity