Cisco Cisco Packet Data Interworking Function (PDIF)
IuPS Service Configuration Mode Commands
radio-network-controller ▀
Command Line Interface Reference, StarOS Release 18 ▄
6873
radio-network-controller
This command creates an instance of an RNC configuration to associate with the IuPS service for the SGSN. This
command is only available in release 8.0; use the
command is only available in release 8.0; use the
rnc
command for releases 8.1 and higher.
Product
SGSN
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration > Context Configuration > IuPS Service Configuration
configure > context context_name > iups-service service_name
Entering the above command sequence results in the following prompt:
[context_name]host_name(config-ctx-iups-service)#
Syntax
radio-network-controller id rnc_id mcc mcc_num mnc mnc_num
no radio-network-controller id rnc_id mcc mcc_num mnc mnc_num
no
Removes the configuration information for the specified RNC.
id rnc_id
Define the instance number of the RNC configuration.
rnc_id
: Must be an integer from 0 to 4095.
mcc mcc_num
Specifies the mobile country code (MCC).
mcc_num
: Must be an integer between 100 and 999.
mnc mnc_num
Specifies the mobile network code (MNC).
mnc_num
: Must be an integer between 00 and 999.
Usage
Use this command to configure information for the IuPS service to use to contact specific RNCs.
This command also provides access to the RNC configuration mode.
This command also provides access to the RNC configuration mode.
Example
The following command creates or accesses RNC configuration instance
#1
with MCC of
131
and MNC of
22
:
radio-network-controller id 1 mcc 131 mnc 22