Cisco Cisco Packet Data Interworking Function (PDIF)
IuPS Service Configuration Mode Commands
tigoc-timeout ▀
Command Line Interface Reference, StarOS Release 18 ▄
6883
tigoc-timeout
This command configures the TigOc interval.
Product
SGSN
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration > Context Configuration > IuPS Service Configuration
configure > context context_name > iups-service service_name
Entering the above command sequence results in the following prompt:
[context_name]host_name(config-ctx-iups-service)#
Syntax
tigoc-timeout time
default tigoc-timeout
default
Resets the timer configuration to the default setting.
time
This command sets the time in seconds.
time
: Must be an integer from 1 to 60.
Default: 5.
Usage
Define the amount of time that the SGSN ignores any overload messages for TigOc interval after receiving
one overload message from the RNC.
one overload message from the RNC.
Example
Use the following command to change the default TigOc interval to
4
seconds:
tigoc-timeout 4