Cisco Cisco Packet Data Interworking Function (PDIF)
LMA Service Configuration Mode Commands
revocation ▀
Command Line Interface Reference, StarOS Release 18 ▄
6975
revocation
Enables the MIP revocation feature and configures revocation parameters.
Product
P-GW
SAEGW
Privilege
Administrator
Syntax
revocation { enable | max-retransmission number | retransmission-timeout msecs }
default revocation { enable | max-retransmission | retransmission-timeout }
no revocation enable
default
Resets the keyword to its default value.
no
Disables revocation for this service.
enable
Default: disabled
Enables the MIP registration revocation feature for the LMA service. When enabled, if revocation is
negotiated with a MAG and a MIP binding is terminated, the LMA can send a Revocation message to the
MAG. This feature is disabled by default.
Enables the MIP registration revocation feature for the LMA service. When enabled, if revocation is
negotiated with a MAG and a MIP binding is terminated, the LMA can send a Revocation message to the
MAG. This feature is disabled by default.
max-retransmission number
Default: 3
The maximum number of retransmissions of a Revocation message before the revocation fails.
The maximum number of retransmissions of a Revocation message before the revocation fails.
number
must
be an integer value from 0 through 10.
retransmission-timeout msecs
Default: 3000
The number of milliseconds to wait for a Revocation Acknowledgement from the MAG before retransmitting
the Revocation message.
The number of milliseconds to wait for a Revocation Acknowledgement from the MAG before retransmitting
the Revocation message.
msecs
must be an integer value from 500 through 10000.
Usage
Use this command to enable or disable the MIP revocation feature on the LMA or to change settings for this
feature.
feature.
Example
The following command sets the maximum number of retries for a Revocation message to
6
:
revocation max-retransmission 6