Cisco Cisco Packet Data Interworking Function (PDIF)
LTE Policy Configuration Mode Commands
▀ cause-code-group
▄ Command Line Interface Reference, StarOS Release 18
7154
cause-code-group
Creates a new cause code group, or specifies an existing cause code group and enters the Cause Code Group
Configuration Mode.
Configuration Mode.
Product
MME
SGSN
Privilege
Administrator
Mode
Exec > Global Configuration > LTE Policy Configuration
configure > lte-policy
Entering the above command sequence results in the following prompt:
[local]host_name(lte-policy)#
Syntax
cause-code-group group_name protocol { bssgp | ranap | s1ap }
no cause-code-group group_name protocol { bssgp | ranap | s1ap }
no
Removes the specified cause code group with all related configuration from the LTE Policy.
group_name
Specify a name of a cause-code-group to create, modify, or remove. This name must be an alphanumeric
string of 1 through 16 characters. Each new cause-code-group must have a unique name.
A maximum of 4 cause code groups can be defined across all services (MME+GPRS+SGSN).
string of 1 through 16 characters. Each new cause-code-group must have a unique name.
A maximum of 4 cause code groups can be defined across all services (MME+GPRS+SGSN).
protocol
Specifies the protocol for the cause code group being created/accessed. Options include:
BSSGP for 2G.
RANAP for 3G
S1-AP
Usage
Use this command to create or modify a group of cause codes.
Entering this command results in a prompt, with the protocol ID included, similar to the following:
Entering this command results in a prompt, with the protocol ID included, similar to the following:
[context_name]hostname(s1ap-cause-code)#
Depending upon the protocol you have selected, the Cause Code Group configuration commands are defined
in the
in the