Cisco Cisco Packet Data Interworking Function (PDIF)
LTE Policy Configuration Mode Commands
lte-emergency-profile ▀
Command Line Interface Reference, StarOS Release 18 ▄
7167
lte-emergency-profile
Creates an LTE emergency profile or specifies an existing emergency profile and enters the LTE Emergency Profile
Configuration Mode.
Configuration Mode.
Product
MME
ePDG
SAEGW
S-GW
Privilege
Administrator
Mode
Exec > Global Configuration > LTE Policy Configuration
configure > lte-policy
Entering the above command sequence results in the following prompt:
[local]host_name(lte-policy)#
Syntax
[ no ] lte-emergency-profile profile_name [ -noconfirm ]
no
Removes an LTE emergency profile from the system.
profile_name
Specifies the name of the LTE emergency profile being created or accessed. If the profile name does not refer
to an existing profile, a new profile is created.
to an existing profile, a new profile is created.
profile_name
is an alphanumeric string of 1 through 64
characters.
-noconfirm
Executes the command without any additional prompt and confirmation from the user.
Usage
Use this command to enter the LTE Emergency Profile Configuration Mode for an existing profile or for a
newly defined profile. This command is also used to remove an existing profile.
newly defined profile. This command is also used to remove an existing profile.
Important:
A maximum of four LTE emergency profiles are allowed per system.
Entering this command results in the following prompt:
[context_name]hostname(lte-emergency-profile)#