Cisco Cisco Packet Data Interworking Function (PDIF)
MAP Service Configuration Mode Commands
▀ access-protocol
▄ Command Line Interface Reference, StarOS Release 18
7236
access-protocol
Configures access protocol parameters for the MAP service as defined for a specific SCCP network instance.
Product
SGSN
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration > Context Configuration > MAP Service Configuration
configure > context context_name > map-service service_name
Entering the above command sequence results in the following prompt:
[context_name]host_name(config-map-service-service_name)#
Syntax
access-protocol sccp-network sccp_id ssn subsys_num
no access-protocol sccp-network sccp_id ssn subsys_num
sccp-network
sccp_id
Specifies the ID number of the SCCP network to use for the SGSN connection.
sccp_id
: Must be an integer from 1 to 16.
ssn subsys_num
Identifies the subsystem number for the destination.
subsys_num:
Enter an integer from 1 through 255.
no
Removes the access protocol SCCP network instance ID from the configuration.
Usage
Use this command to associate access protocol parameters to a specific instance of the MAP service for an
SCCP network.
SCCP network.
Example
The following command associates the access protocols with the SCCP network ID #10:
access-protocol sccp-network 10