Cisco Cisco Packet Data Interworking Function (PDIF)
MME MSC Pool Area Configuration Mode
▀ use-msc
▄ Command Line Interface Reference, StarOS Release 18
7288
use-msc
Associates a Mobile Switching Center (MSC) with the pool area.
Product
MME
Privilege
Administrator
Mode
Exec > Global Configuration > Context Configuration > MME Service Configuration > Pool Area Configuration
configure > context conext_name > mme-service service_name > pool-area pool_area_name
type round-robin
type round-robin
Entering the above command sequence results in the following prompt:
[context_name]host_name(config-mme-pool-area-round-robin)#
Syntax
[ no ] use-msc msc_name
no
Removes the associated MSC name from this pool area.
use-mscmsc_name
Associates an MSC name with this pool area.
msc_name
is the name of the MSC as configured in the MME Service using the
msc
command;
msc_name
must be an alphanumeric string of 1 to 39 characters.
Usage
This command associates an MSC with this pool area. With a round-robin pool area selection, the MME
selects the next MSC within the pool based on a round-robin scheme.
A maximum of 24 MSC associations can be defined within each round-robin pool area.
selects the next MSC within the pool based on a round-robin scheme.
A maximum of 24 MSC associations can be defined within each round-robin pool area.
Example
The following command associates the MSC named
mscsouth1
to this pool.
use-msc mscsouth1