Cisco Cisco Packet Data Interworking Function (PDIF)
MME Service Configuration Mode Commands
local-cause-code-mapping ctxt-xfer-fail-sgsn ▀
Command Line Interface Reference, StarOS Release 18 ▄
7337
local-cause-code-mapping ctxt-xfer-fail-sgsn
Configures the reject cause code to send to a UE when a UE context transfer failure from a peer SGSN occurs.
Product
MME
Privilege
Administrator
Mode
Exec > Global Configuration > Context Configuration > MME Service
configure > context context_name > mme-service service_name
Entering the above command sequence results in the following prompt:
[context_name]host_name(config-mme-service)#
Syntax
local-cause-code-mapping ctxt-xfer-fail-sgsn emm-cause-code { eps-service-not-allowed-in-
this-plmn | network-failure | no-suitable-cell-in-tracking-area | plmn-not-allowed |
roaming-not-allowed-in-this-tracking-area | tracking-area-not-allowed | unknown-ue-
context }
this-plmn | network-failure | no-suitable-cell-in-tracking-area | plmn-not-allowed |
roaming-not-allowed-in-this-tracking-area | tracking-area-not-allowed | unknown-ue-
context }
default local-cause-code-mapping ctxt-xfer-fail-sgsn
default local-cause-code-mapping ctxt-xfer-fail-sgsn
Returns the cause code mapping to its default value:
unknown-ue-context
.
ctxt-xfer-fail-sgsn emm-cause-code { eps-service-not-allowed-in-this-plmn |
network-failure | no-suitable-cell-in-tracking-area | plmn-not-allowed | roaming-
not-allowed-in-this-tracking-area | tracking-area-not-allowed | unknown-ue-
context }
network-failure | no-suitable-cell-in-tracking-area | plmn-not-allowed | roaming-
not-allowed-in-this-tracking-area | tracking-area-not-allowed | unknown-ue-
context }
Specifies the EPS Mobility Management (EMM) cause code to return when a UE context transfer failure
from an old SGSN occurs.
from an old SGSN occurs.
eps-service-not-allowed-in-this-plmn
network-failure
no-suitable-cell-in-tracking-area
plmn-not-allowed
roaming-not-allowed-in-this-tracking-area
tracking-area-not-allowed
unknown-ue-context
- Default