Cisco Cisco Packet Data Interworking Function (PDIF)
MME Service Configuration Mode Commands
mme-id ▀
Command Line Interface Reference, StarOS Release 18 ▄
7365
mme-id
Configures the MME identifier within an MME service. The MME identifier is constructed form the MME group ID
and MME Code.
and MME Code.
Product
MME
Privilege
Administrator
Mode
Exec > Global Configuration > Context Configuration > MME Service
configure > context context_name > mme-service service_name
Entering the above command sequence results in the following prompt:
[context_name]host_name(config-mme-service)#
Syntax
mme-id group-id grp_id mme-code mme_code
no mme-id
no
Removes the configured MME identifier for this MME service.
Caution:
Removing the MME identifier is a disruptive operation; the MME service is removed from the
system.
group-id
grp_id
Specifies the group identifier for the group of which this MME belongs as an integer from 0 through 65535.
mme-code
mme_code
Specifies the unique code for this MME service as an integer from 0 through 255.
Usage
Use this command to set the MME identifier for this MME service. This MME identifier will be the identity
of this MME in network.
of this MME in network.
Caution:
Changing or removing the MME identifier is a disruptive operation; the MME service will be re-
started or removed from service.
Example
The following command configures the MME identifier with group id as
41025
and MME code as
101
for
this MME service:
mme-id group-id 41025 mme-code 101