Cisco Cisco Packet Data Interworking Function (PDIF)
MME SGs Service Configuration Mode Commands
bind ▀
Command Line Interface Reference, StarOS Release 18 ▄
7421
bind
Binds the service to a logical IP interface serving as the SGs interface.
Product
MME
Privilege
Administrator
Mode
Exec > Global Configuration > Context Configuration > MME SGs Service Configuration
configure > context context_name > sgs-service service_name
Entering the above command sequence results in the following prompt:
[context_name]host_name(config-sgs-service)#
Syntax
bind { ipv4-address ipv4_address [ ipv4-address ipv4_address ] | ipv6-address
ipv6_address [ ipv6-address ipv6_address ] }
ipv6_address [ ipv6-address ipv6_address ] }
no bind
no bind
Removes the interface binding from this service.
ipv4-address ipv4_address [ ipv4-address ipv4_address ]
Specifies the IP address of the SGs interface in IPv4 dotted-decimal notation. n.
A secondary IPv4 address can be configured to support SCTP multi-homing.
A secondary IPv4 address can be configured to support SCTP multi-homing.
ipv6-address ipv6_address [ ipv6-address ipv6_address ]
Specifies the IP address of the SGs interface in IPv6 colon-separated-hexadecimal notation.
A secondary IPv6 address can be configured to support SCTP multi-homing.
A secondary IPv6 address can be configured to support SCTP multi-homing.
Usage
Associate the SGs service to a specific logical IP address. The logical IP address or interface takes on the
characteristics of an SGs interface that provides the session connectivity for circuit switched fallback (CSFB)
to/from a Mobile Switching Center/Visitor Location Register (MSC/VLR). Only one interface can be bound
to a service. The interface should be configured prior to issuing this command
characteristics of an SGs interface that provides the session connectivity for circuit switched fallback (CSFB)
to/from a Mobile Switching Center/Visitor Location Register (MSC/VLR). Only one interface can be bound
to a service. The interface should be configured prior to issuing this command
Caution:
This is a critical configuration. Any change to this configuration will cause the SGs service to restart.
Removing or disabling this configuration will stop the SGs service.
Example
The following command binds the logical IP interface with the IPv4 address of
192.68.10.22
to the SGs
service:
bind ipv4-address 192.68.10.22