Cisco Cisco Packet Data Interworking Function (PDIF)
ORBEM Configuration Mode Commands
iop-address ▀
Command Line Interface Reference, StarOS Release 18 ▄
7539
iop-address
Sets the IP address used by the ORBEM Server to advertise service.
Product
All
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration > ORBEM Configuration
configure > orbem
Entering the above command sequence results in the following prompt:
[local]host_name(config-orbem)#
Syntax
[ default ] iop-address ip_address
default
Restores the IP address for inter-ORB communications to the system default: IP address of the current
context.
context.
ip_address
Specifies the IP address to use for inter-ORB communications using IPv4 dotted-decimal notation.
Usage
Change the inter-ORB IP address when the IP address of the current context should not be used. The IP
address of the local context may not be appropriate when the ORB configuration across nodes would cause
conflicts with the IP addresses.
The default inter-ORB IP address is the IP address of the current context.
address of the local context may not be appropriate when the ORB configuration across nodes would cause
conflicts with the IP addresses.
The default inter-ORB IP address is the IP address of the current context.
Example
The following command sets the inter-ORB IPv4 address to 10.2.3.4:
iop-address 10.2.3.4