Cisco Cisco Packet Data Interworking Function (PDIF)
OSPF VRF Configuration Mode Commands
▀ area
▄ Command Line Interface Reference, StarOS Release 18
7600
area
Configures various parameters, including authentication, area identification, virtual link ID, and delay/interval values
for the specified OSPF area using a specific VRF instance.
for the specified OSPF area using a specific VRF instance.
Product
PDSN
HA
GGSN
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration > Context Configuration > OSPF Configuration > OSPF VRF Configuration
configure > context context_name > router ospf > ip vrf vrf_name
Entering the above command sequence results in the following prompt:
[local]host_name(config-ospf-vrf)#
Syntax
[no] area { decimal_value | ip_address } {authentication [ message-digest ] | default-
cost cost_value | nssa [default-information-originate] [no-redistribution] [no-summary]
[translate-always] [translate-candidate] [translate-never] | stub [no-summary] | virtual-
link router_ip_address [authentication {message-digest | null | text}| authentication-key
{encrypted password encrypted_string | password password_string}| message-digest-key
key_id md5 [encrypted password encrypted_string | password password_string]} [dead-
interval] [hello-interval] [retransmit-interval] [transmit-delay]
cost cost_value | nssa [default-information-originate] [no-redistribution] [no-summary]
[translate-always] [translate-candidate] [translate-never] | stub [no-summary] | virtual-
link router_ip_address [authentication {message-digest | null | text}| authentication-key
{encrypted password encrypted_string | password password_string}| message-digest-key
key_id md5 [encrypted password encrypted_string | password password_string]} [dead-
interval] [hello-interval] [retransmit-interval] [transmit-delay]
no
Disables or removes configured parameters for the specified OSPF area using a specific VRF instance.
ip_address
Specifies the IP address of the area where authentication will be enabled in IPv4 dotted-decimal notation.
decimal_value
Specifies the identification number of the area where parameters to be configured as an integer from 0
through 4294967295.
through 4294967295.
authentication
Sets the OSPF authentication type to use the simple authentication method.
message-digest
Sets the OSPF authentication type to use the message digest 5 (MD5) authentication method.
default-cost cost_value
Sets the default cost for an OSPF area.
cost_value
must be an integer from 0 through 16777215.