Cisco Cisco Packet Data Interworking Function (PDIF)
PCC-Service Configuration Mode Commands
▀ map-profile priority
▄ Command Line Interface Reference, StarOS Release 18
7826
map-profile priority
This command defines the parameter and key priorities to match the profile condition for a subscriber in a PCC-service
instance for IPCF configuration.
instance for IPCF configuration.
Product
IPCF
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration > Context Configuration > PCC Service Configuration
configure > context context_name > pcc-service service_name
Entering the above command sequence results in the following prompt:
[context_name]host_name(config-pcc-service)#
Syntax
[no] map-profile priority map_prio_value apn [apn_name profile-policy name pcc_prof_name]
[ no ] map-profile priority map_prio_value profile-policy name pcc_prof_name]
[ no ] map-profile priority map_prio_value subscription-attribute name subs_attrib_name [
value subs_attrib_value ] profile-policy name pcc_prof_name]
value subs_attrib_value ] profile-policy name pcc_prof_name]
no
Removes/disables the set priority value of specific profile mapping parameters.
map_prio_value
Identifies the priority value of specific profile mapping parameters.
The
The
map_prio_value
must be an integer value from 1 through 1024.
apn
apn_name
This keywords associates a pre-configured/defined APN name to map with specific profile mapping priority.
The
The
apn_name
specifies the name of the APN configured for subscriber session to which a priority value is
set for profile mapping and must be an alphanumerical string from 1 through 63 characters.
condition-group
cond_grp_name
This keywords associates a pre-configured/defined PCC-Condition-Group configured in PCC-Service
Configuration mode to map with specific profile making priority.
The
Configuration mode to map with specific profile making priority.
The
cond_grp_name
is pre-configured PCC-Condition-Group and must be an alphanumerical string from 1
through 63 characters.
Important:
For more information on PCC-Condition-Group configuration, refer
condition-group
command
in this chapter.