Cisco Cisco Packet Data Interworking Function (PDIF)
PCC-Usage-Monitor Configuration Mode Commands
usage-limit volume ▀
Command Line Interface Reference, StarOS Release 18 ▄
7879
usage-limit volume
Sets the usage limit by volume for a subscriber profile for a PCC-Service-Profile on an IPCF node.
Product
IPCF
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration > Context Configuration > PCC Service Configuration > PCC Service Profile
Configuration > PCC Usage-Monitor Configuration
Configuration > PCC Usage-Monitor Configuration
configure > context context_name > pcc-service service_name > profile profile_name >
usage-monitor usage_monitor_name
usage-monitor usage_monitor_name
Entering the above command sequence results in the following prompt:
[context_name]host_name(config-pcc-profile-usage-mon)#
Syntax
[default usage-limit volume [downlink dlink_volume | total total_volume | uplink
uplink_volume]
uplink_volume]
default
Sets the usage limit volume to “0” for downlink, uplink and total bucket in a PCC-Service-Profile.
downlink
dlink_volume
Specifies the usage volume (in kilobytes) in the downlink direction (from PCEF to UE) as an integer from 1
through 4294967296. A “0” (zero) value disables the downlink volume usage. Default: 0
through 4294967296. A “0” (zero) value disables the downlink volume usage. Default: 0
total
total_volume
Specifies the usage volume (in kilobytes) in the downlink and uplink directions (from PCEF to UE and PCEF
to PDN) as an integer from 1 through 4294967296. A “0” (zero) value disables the downlink volume usage.
Default: 0
to PDN) as an integer from 1 through 4294967296. A “0” (zero) value disables the downlink volume usage.
Default: 0
uplink
uplink_volume
Specifies the usage volume (in kilobytes) in the uplink direction (from PCEF to PDN) as an integer from 1
through 4294967296. A “0” (zero) value disables the downlink volume usage. Default: 0
through 4294967296. A “0” (zero) value disables the downlink volume usage. Default: 0
Usage
Use this command to set the usage limit in volume for subscriber profile for a PCC-Service-Profile on IPCF
node.
node.
Example
The following command sets the usage limit volume to 20000 kilobytes in the upload direction within a PCC-
Service-Profile.
Service-Profile.
usage-limit volume uplink 20000