Cisco Cisco Packet Data Interworking Function (PDIF)
![Cisco](https://files.manualsbrain.com/attachments/7380d0050044647c30f5c24bbbf5d0c0b6d9bb84/common/fit/150/50/faa183d287233c52228cfea3dbc2a127fe780f60564fcb0955d9c3d1cd23/brand_logo.png)
PDSN Service Configuration Mode Commands
data-over-signaling ▀
Command Line Interface Reference, StarOS Release 18 ▄
7953
data-over-signaling
Enables the data-over-signaling marking feature for A10 packets.
Product
PDSN
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration > Context Configuration > PDSN Service Configuration
configure > context context_name > pdsn-service service_name
Entering the above command sequence results in the following prompt:
[context_name]host_name(config-pdsn-service)#
Syntax
[ no | default ] data-over signaling
default
Sets / Restores default value assigned for specified parameter for
data-over signaling
no
Default: Enabled
Disable the data-over signaling feature for A10 packets.
Disable the data-over signaling feature for A10 packets.
Usage
Use this command to enable or disable the data-over signaling feature for A10 packets.
Important:
This is a customer-specific command.
Example
no data-over-signaling