Cisco Cisco Packet Data Interworking Function (PDIF)
![Cisco](https://files.manualsbrain.com/attachments/7380d0050044647c30f5c24bbbf5d0c0b6d9bb84/common/fit/150/50/faa183d287233c52228cfea3dbc2a127fe780f60564fcb0955d9c3d1cd23/brand_logo.png)
PDSN Service Configuration Mode Commands
▀ pdsn type0-tft attempt-inner-match
▄ Command Line Interface Reference, StarOS Release 18
7980
pdsn type0-tft attempt-inner-match
Configures a type0 traffic flow template (tft) to a type1 traffic flow template.
Product
PDSN
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration > Context Configuration > PDSN Service Configuration
configure > context context_name > pdsn-service service_name
Entering the above command sequence results in the following prompt:
[context_name]host_name(config-pdsn-service)#
Syntax
[ no | default ] pdsn type0-tft attempt-inner-match
no
Disables
pdsn type0-tft attempt-inner-match
.
default
Sets / Restores default value assigned for
pdsn
type0-tft
attempt-inner-match.
Usage
This CLI is used make PDSN match inner IP packets for an AIMS call. When enabled, the PDSN tries to
match a type-0 tft to match both outer and inner packet, so that MN can use a Type-0 filter for HoA traffic
which are tunneled.
This is disabled by default.
match a type-0 tft to match both outer and inner packet, so that MN can use a Type-0 filter for HoA traffic
which are tunneled.
This is disabled by default.
Example
The following command enables type0 tft:
pdsn type0-tft attempt-inner-match