Cisco Cisco Packet Data Interworking Function (PDIF)
PDSN Service Configuration Mode Commands
▀ threshold a11-ppp-send-discard
▄ Command Line Interface Reference, StarOS Release 18
8012
threshold a11-ppp-send-discard
Sets an alarm or alert for the PDSN service based on the number of packets that the PPP protocol processing layer
internally discarded on transmit for any reason.
internally discarded on transmit for any reason.
Product
PDSN
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration > Context Configuration > PDSN Service Configuration
configure > context context_name > pdsn-service service_name
Entering the above command sequence results in the following prompt:
[context_name]host_name(config-pdsn-service)#
Syntax
threshold a11-ppp-send-discard high_thresh [ clear low_thresh ]
no threshold a11-ppp-send-discard
no
Deletes the alert or alarm.
high_thresh
Default:
0
The high threshold number of discarded PPP send packets that must be met or exceeded within the polling
interval to generate an alert or alarm. It can be configured to any integer value between
interval to generate an alert or alarm. It can be configured to any integer value between
0
and
100000
.
clear
low_thresh
Default:
0
The low threshold number of discarded PPP send packets that must be met or exceeded within the polling
interval to clear an alert or alarm. It can be configured to any integer value between
interval to clear an alert or alarm. It can be configured to any integer value between
0
and
100000
.
Important:
This value is ignored for the Alert model. In addition, if this value is not configured for the Alarm
model, the system assumes it is identical to the high threshold.
Usage
Use this command to set an alert or an alarm when the number of discarded PPP send packets is equal to or
greater than a specified number.
Alerts or alarms are triggered for the number of discarded PPP send packets is based on the following rules:
greater than a specified number.
Alerts or alarms are triggered for the number of discarded PPP send packets is based on the following rules:
Enter condition: Actual number of discarded PPP send packets > High Threshold
Clear condition: Actual number of discarded PPP send packets £ Low Threshold
Example