Cisco Cisco Packet Data Interworking Function (PDIF)
PDSN Service RoHC Configuration Mode Commands
▀ mrru
▄ Command Line Interface Reference, StarOS Release 18
8028
mrru
Sets the size of the largest reconstructed reception unit, in octets, that the decompressor is expected to reassemble from
segments. The size includes the CRC. If MRRU is negotiated to be 0, no segment headers are allowed on the channel.
segments. The size includes the CRC. If MRRU is negotiated to be 0, no segment headers are allowed on the channel.
Product
PDSN
Privilege
Security Administrator, Administrator
Mode
Exec > Global Configuration > Context Configuration > PDSN Service Configuration > PDSN Service ROHC
configure > context context_name > pdsn-service service_name > ip header-compression rohc
Entering the above command sequence results in the following prompt:
[context_name]host_name(config-ip-header-compression-rohc)#
Syntax
mrru num_octets
default mrru
default
reset the value of this command to its default setting
num_octets
Default: 0
This is the number of octets for the maximum size of the largest reconstructed reception unit allowed.
This is the number of octets for the maximum size of the largest reconstructed reception unit allowed.
num_octets
must be an integer from 0 through 65535.
Usage
Use this command to set the size, in octets, of the largest reconstructed reception unit, in octets, that the
decompressor is expected to reassemble from segments.
decompressor is expected to reassemble from segments.
Example
The following command sets the largest reconstructed reception unit to 1024 octets:
mrru 1024
The following command resets the mrru size to its default of 0 octets:
default mrru